TBS Tango 2 – The 500mW Mod Tutorial
Livyu tears apart the new Tango 2 to increase its power to 500mW
It’s here! Team Blacksheep just released one of their best products yet: The Tango2 Remote! It is an all-in-one solution remote&crossfire link, running on OpenTX(freedom tx right now but would be merged into OpenTX soon). The crossfire RF inside the remote has 250mW output power from the factory but I managed to modify it so that it can output 500mW.
Please support me by subscribing to my channel and pressing the notification bell. WARNING! This mod will void your warranty, so you have been warned 🙂
Things you will need for this mod: TOOLS Hot air gun & flux Solder Wick Soldering Iron (with fine tip & chisel tip) Fine Tweezers 60/40 Solder 0.5mm is what I use COMPONENTS BGA7127 RF AMP IC 1.8 Ohms 0.1W, Resistor 0603 (could be smaller size but same power rating) 12 pF, Capacitor 0402 10 nF, Capacitor 0402 O Ohm, Resistor 0402 (or just a solder blob/wire shunt) Output powers after the mod: 25mW setting in remote = ~30mW 100mW setting in remote = ~180mW 250mW setting in remote = ~ 500mW VIDEO
© 2019 YawSpin